.. index:: Services
.. _Services Configuration:

Services Configuration
======================

The Services section of the GUI is where the various services that
ship with the FreeNAS® system are configured, started, or stopped.
FreeNAS® includes these built-in services:

* :ref:`AFP`

* :ref:`CIFS`

* :ref:`Domain Controller`

* :ref:`Dynamic DNS`

* :ref:`FTP`

* :ref:`iSCSI`

* :ref:`LLDP`

* :ref:`NFS`

* :ref:`Rsync`

* :ref:`S.M.A.R.T.`

* :ref:`SNMP`

* :ref:`SSH`

* :ref:`TFTP`

* :ref:`UPS`

* :ref:`WebDAV`

This section demonstrates how to start a FreeNAS® service then
describes the available configuration options for each FreeNAS®
service.

.. index:: Start Service, Stop Service
.. _Control Services:

Control Services
----------------

:menuselection:`Services --> Control Services`, shown in Figure 11.1a,
allows you to quickly determine which services are currently running,
and to start, stop, or configure services. Only the S.M.A.R.T. service
is enabled by default.  Other services default to off until you start
them.

**Figure 11.1a: Control Services**

.. image:: images/services.png

A service is stopped if its icon is a red "OFF". A service is running
if its icon is a blue "ON". To start or stop a service, click its
ON/OFF icon.

To configure a service, click the wrench icon associated with the
service or click the name of the service in the "Services" section of
the tree menu.

If a service does not start, go to
:menuselection:`System --> Advanced` and check the box "Show console
messages in the footer". Console messages will now show at the bottom
of your browser. If you click the console messages area, it will
pop-up as a window, allowing you to scroll through the output and to
copy messages. Watch these messages for errors when you stop and start
the problematic service.

To read the system logs for more information about a service failure,
open :ref:`Shell` and type :command:`more /var/log/messages`.

.. index:: AFP, Apple Filing Protocol
.. _AFP:

AFP
---

The settings that are configured when creating AFP Shares in
:menuselection:`Sharing --> Apple (AFP) Shares --> Add Apple (AFP)
Share` are specific to each configured AFP Share. In contrast, global
settings which apply to all AFP shares are configured in
:menuselection:`Services --> AFP`.

Figure 11.2a shows the available global AFP configuration options
which are described in Table 11.2a.

**Figure 11.2a: Global AFP Configuration**

.. image:: images/afp1a.png

**Table 11.2a: Global AFP Configuration Options**

+-------------------------+----------------+-----------------------------------------------------------------------------------------------------------------+
| **Setting**             | **Value**      | **Description**                                                                                                 |
|                         |                |                                                                                                                 |
+=========================+================+=================================================================================================================+
| Guest Access            | checkbox       | if checked, clients will not be prompted to authenticate before accessing AFP shares                            |
|                         |                |                                                                                                                 |
+-------------------------+----------------+-----------------------------------------------------------------------------------------------------------------+
| Guest account           | drop-down menu | select account to use for guest access; the selected account must have permissions to the volume/dataset being  |
|                         |                | shared                                                                                                          |
|                         |                |                                                                                                                 |
+-------------------------+----------------+-----------------------------------------------------------------------------------------------------------------+
| Bind IP Addresses       | selection      | used to specify the IP address(es) to listen for FTP connections; highlight the desired IP address(es) in the   |
|                         |                | "Available" list and use the ">>" button to add to the "Selected" list                                          |
|                         |                |                                                                                                                 |
+-------------------------+----------------+-----------------------------------------------------------------------------------------------------------------+
| Max Connections         | integer        | maximum number of simultaneous connections                                                                      |
|                         |                |                                                                                                                 |
+-------------------------+----------------+-----------------------------------------------------------------------------------------------------------------+
| Enable home directories | checkbox       | if checked, any user home directories located under "Home directories" will be available over the share         |
|                         |                |                                                                                                                 |
+-------------------------+----------------+-----------------------------------------------------------------------------------------------------------------+
| Home directories        | browse button  | select the volume or dataset which contains user home directories                                               |
|                         |                |                                                                                                                 |
+-------------------------+----------------+-----------------------------------------------------------------------------------------------------------------+
| Home share name         | string         | overrides default home folder name with the specified value                                                     |
|                         |                |                                                                                                                 |
+-------------------------+----------------+-----------------------------------------------------------------------------------------------------------------+
| Database Path           | browse button  | select the path to store the CNID databases used by AFP (default is the root of the volume); the path must be   |
|                         |                | writable                                                                                                        |
+-------------------------+----------------+-----------------------------------------------------------------------------------------------------------------+
| Global auxiliary        | string         | additional `afp.conf(5) <http://netatalk.sourceforge.net/3.0/htmldocs/afp.conf.5.html>`_                        |
| parameters              |                | parameters not covered elsewhere in this screen                                                                 |
|                         |                |                                                                                                                 |
+-------------------------+----------------+-----------------------------------------------------------------------------------------------------------------+

When configuring home directories, it is recommended to create a
dataset to hold the home directories which contains a child dataset
for each user. As an example, create a dataset named
:file:`volume1/homedirs` and browse to this dataset when configuring
the "Home directories" field of the AFP service. Then, as you create
each user, first create a child dataset for that user. For example,
create a dataset named :file:`volume1/homedirs/user1`. When you create
the *user1* user, browse to the :file:`volume1/homedirs/user1` dataset
in the "Home Directory" field of the "Add New User" screen.

.. _Troubleshooting AFP:

Troubleshooting AFP
~~~~~~~~~~~~~~~~~~~

You can determine which users are connected to an AFP share by typing
:command:`afpusers`.

If you receive a "Something wrong with the volume's CNID DB" error
message, run this command from :ref:`Shell`, replacing the path to the
problematic AFP share::

 dbd -rf /path/to/share

This command may take a while, depending upon the size of the volume
or dataset being shared. This command will wipe the CNID database and
rebuild it from the CNIDs stored in the AppleDouble files.

.. index:: CIFS, Samba, Windows File Share, SMB
.. _CIFS:

CIFS
----

The settings that are configured when creating CIFS Shares in
:menuselection:`Sharing --> Windows (CIFS) Shares
--> Add Windows (CIFS) Share`
are specific to each configured CIFS Share. In contrast, global
settings which apply to all CIFS shares are configured in
:menuselection:`Services --> CIFS`.

.. note:: After starting the CIFS service, it may take several minutes
          for the `master browser election
          <http://www.samba.org/samba/docs/man/Samba-HOWTO-Collection/NetworkBrowsing.html#id2581357>`_
          to occur and for the FreeNAS® system to become available in
          Windows Explorer.

.. note:: CIFS cannot be disabled while :ref:`Active Directory` is
   enabled.

Figure 11.3a shows the global CIFS configuration options which are
described in Table 11.3a. This configuration screen is really a
front-end to `smb4.conf <http://www.sloop.net/smb.conf.html>`_.

**Figure 11.3a: Global CIFS Configuration**

.. image:: images/cifs1a.png

**Table 11.3a: Global CIFS Configuration Options**

+----------------------------------+----------------+-------------------------------------------------------------------------------------------------------+
| **Setting**                      | **Value**      | **Description**                                                                                       |
|                                  |                |                                                                                                       |
+==================================+================+=======================================================================================================+
| NetBIOS Name                     | string         | automatically populated with the system's original hostname; it **must**  be different from the       |
|                                  |                | *Workgroup* name                                                                                      |
|                                  |                |                                                                                                       |
+----------------------------------+----------------+-------------------------------------------------------------------------------------------------------+
| Workgroup                        | string         | must match Windows workgroup name; this setting is ignored if the Active Directory or LDAP service is |
|                                  |                | running                                                                                               |
|                                  |                |                                                                                                       |
+----------------------------------+----------------+-------------------------------------------------------------------------------------------------------+
| Description                      | string         | optional                                                                                              |
|                                  |                |                                                                                                       |
+----------------------------------+----------------+-------------------------------------------------------------------------------------------------------+
| DOS charset                      | drop-down menu | the character set Samba uses when communicating with DOS and Windows 9x/ME clients; default is        |
|                                  |                | *CP437*                                                                                               |
|                                  |                |                                                                                                       |
+----------------------------------+----------------+-------------------------------------------------------------------------------------------------------+
| UNIX charset                     | drop-down menu | default is *UTF-8* which supports all characters in all languages                                     |
|                                  |                |                                                                                                       |
+----------------------------------+----------------+-------------------------------------------------------------------------------------------------------+
| Log level                        | drop-down menu | choices are *Minimum*,                                                                                |
|                                  |                | *Normal*, or                                                                                          |
|                                  |                | *Debug*                                                                                               |
|                                  |                |                                                                                                       |
+----------------------------------+----------------+-------------------------------------------------------------------------------------------------------+
| Use syslog only                  | checkbox       | when checked, authentication failures are logged to :file:`/var/log/messages` instead of the default  |
|                                  |                | of :file:`/var/log/samba4/log.smbd`                                                                   |
|                                  |                |                                                                                                       |
+----------------------------------+----------------+-------------------------------------------------------------------------------------------------------+
| Local Master                     | checkbox       | determines whether or not the system participates in a browser election; should be disabled           |
|                                  |                | when network contains an AD or LDAP server and is not necessary if Vista or Windows 7 machines are    |
|                                  |                | present                                                                                               |
|                                  |                |                                                                                                       |
+----------------------------------+----------------+-------------------------------------------------------------------------------------------------------+
| Domain logons                    | checkbox       | only check if need to provide the netlogin service for older Windows clients                          |
|                                  |                |                                                                                                       |
+----------------------------------+----------------+-------------------------------------------------------------------------------------------------------+
| Time Server for Domain           | checkbox       | determines whether or not the system advertises itself as a time server to Windows clients;           |
|                                  |                | should be disabled when network contains an AD or LDAP server                                         |
|                                  |                |                                                                                                       |
+----------------------------------+----------------+-------------------------------------------------------------------------------------------------------+
| Guest Account                    | drop-down menu | account to be used for guest access; that account must have permission to access the shared           |
|                                  |                | volume/dataset                                                                                        |
|                                  |                |                                                                                                       |
+----------------------------------+----------------+-------------------------------------------------------------------------------------------------------+
| File mask                        | integer        | overrides default file creation mask of 0666 which creates files with read and write access for       |
|                                  |                | everybody                                                                                             |
|                                  |                |                                                                                                       |
+----------------------------------+----------------+-------------------------------------------------------------------------------------------------------+
| Directory mask                   | integer        | overrides default directory creation mask of 0777 which grants directory read, write and execute      |
|                                  |                | access for everybody                                                                                  |
|                                  |                |                                                                                                       |
+----------------------------------+----------------+-------------------------------------------------------------------------------------------------------+
|                                  |                |                                                                                                       |
| Allow Empty Password             | checkbox       | if checked, users can just press :kbd:`Enter` when prompted for a password; requires that the         |
|                                  |                | username/password be the same as the Windows user account                                             |
|                                  |                |                                                                                                       |
+----------------------------------+----------------+-------------------------------------------------------------------------------------------------------+
| Auxiliary parameters             | string         | :file:`smb.conf` options not covered elsewhere in this screen; see                                    |
|                                  |                | `the Samba Guide <http://www.oreilly.com/openbook/samba/book/appb_02.html>`_                          |
|                                  |                | for additional settings                                                                               |
|                                  |                |                                                                                                       |
+----------------------------------+----------------+-------------------------------------------------------------------------------------------------------+
| Unix Extensions                  | checkbox       | allows non-Windows CIFS clients to access symbolic links and hard links, has no effect on Windows     |
|                                  |                | clients                                                                                               |
|                                  |                |                                                                                                       |
+----------------------------------+----------------+-------------------------------------------------------------------------------------------------------+
| Zeroconf share discovery         | checkbox       | enable if Mac clients will be connecting to the CIFS share                                            |
|                                  |                |                                                                                                       |
+----------------------------------+----------------+-------------------------------------------------------------------------------------------------------+
| Hostnames lookups                | checkbox       | allows you to specify hostnames rather than IP addresses in the "Hosts Allow" or "Hosts Deny" fields  |
|                                  |                | of a CIFS share; uncheck if you only use IP addresses as it saves the time of a host lookup           |
|                                  |                |                                                                                                       |
+----------------------------------+----------------+-------------------------------------------------------------------------------------------------------+
| Server minimum protocol          | drop-down menu | the minimum protocol version the server will support where the default sets automatic                 |
|                                  |                | negotiation; refer to Table 11.3b for descriptions                                                    |
|                                  |                |                                                                                                       |
+----------------------------------+----------------+-------------------------------------------------------------------------------------------------------+
| Server maximum protocol          | drop-down menu | the maximum protocol version the server will support; refer to Table 11.3b for descriptions           |
|                                  |                |                                                                                                       |
+----------------------------------+----------------+-------------------------------------------------------------------------------------------------------+
| Allow execute always             | checkbox       | if checked, Samba will allow the user to execute a file, even if that user's permissions are not set  |
|                                  |                | to execute                                                                                            |
|                                  |                |                                                                                                       |
+----------------------------------+----------------+-------------------------------------------------------------------------------------------------------+
| Obey pam restrictions            | checkbox       | uncheck this box to allow cross-domain authentication, to allow users and groups to be managed on     |
|                                  |                | another forest, or to allow permissions to be delegated from active directory users and groups to     |
|                                  |                | domain admins on another forest                                                                       |
|                                  |                |                                                                                                       |
+----------------------------------+----------------+-------------------------------------------------------------------------------------------------------+
| Bind IP Addresses                | checkboxes     | check the IP address(es) that CIFS should listen on                                                   |
|                                  |                |                                                                                                       |
+----------------------------------+----------------+-------------------------------------------------------------------------------------------------------+
| Idmap Range Low                  | integer        | defines the beginning UID/GID this system is authoritative for; any UID/GID lower than this value is  |
|                                  |                | ignored, providing a way to avoid accidental UID/GID overlaps between local and remotely defined IDs  |
|                                  |                |                                                                                                       |
+----------------------------------+----------------+-------------------------------------------------------------------------------------------------------+
| Idmap Range High                 | integer        | defines the ending UID/GID this system is authoritative for; any UID/GID higher than this value is    |
|                                  |                | ignored, providing a way to avoid accidental UID/GID overlaps between local and remotely defined IDs  |
|                                  |                |                                                                                                       |
+----------------------------------+----------------+-------------------------------------------------------------------------------------------------------+

**Table 11.3b: Description of SMB Protocol Versions**

+----------------+------------------------------------------------------------+
| **Value**      | **Description**                                            |
|                |                                                            |
+================+============================================================+
| CORE           | used by DOS                                                |
|                |                                                            |
+----------------+------------------------------------------------------------+
| COREPLUS       | used by DOS                                                |
|                |                                                            |
+----------------+------------------------------------------------------------+
| LANMAN1        | used by Windows for Workgroups, OS/2, and Windows 9x       |
|                |                                                            |
+----------------+------------------------------------------------------------+
| LANMAN2        | used by Windows for Workgroups, OS/2, and Windows 9x       |
|                |                                                            |
+----------------+------------------------------------------------------------+
| NT1            | used by Windows NT                                         |
|                |                                                            |
+----------------+------------------------------------------------------------+
| SMB2           | used by Windows 7; same as SMB2_10                         |
|                |                                                            |
+----------------+------------------------------------------------------------+
| SMB2_02        | used by Windows Vista                                      |
|                |                                                            |
+----------------+------------------------------------------------------------+
| SMB2_10        | used by Windows 7                                          |
|                |                                                            |
+----------------+------------------------------------------------------------+
| SMB3           | used by Windows 8                                          |
|                |                                                            |
+----------------+------------------------------------------------------------+
| SMB3_00        | used by Windows 8                                          |
|                |                                                            |
+----------------+------------------------------------------------------------+
| SMB3_02        | used by Windows 8.1 and Windows Server 2012                |
|                |                                                            |
+----------------+------------------------------------------------------------+
| SMB3_11        | used by Windows 10                                         |
|                |                                                            |
+----------------+------------------------------------------------------------+


Changes to CIFS settings and CIFS shares take effect immediately.

.. note:: Do not set the *directory name cache size* as an "Auxiliary
          parameter". Due to differences in how Linux and BSD handle
          file descriptors, directory name caching is disabled on BSD
          systems to improve performance.

.. _Troubleshooting CIFS:

Troubleshooting CIFS
~~~~~~~~~~~~~~~~~~~~

Samba is single threaded, so CPU speed makes a big difference in CIFS
performance. A typical 2.5Ghz Intel quad core or greater should be
capable of handling speeds in excess of Gb LAN while low power CPUs
such as Intel Atoms and AMD C-30s\E-350\E-450 will not be able to
achieve more than about 30-40MB/sec typically. Remember that other
loads such as ZFS will also require CPU resources and may cause Samba
performance to be less than optimal.

Samba's *write cache* parameter has been reported to improve write
performance in some configurations and can be added to the "Auxiliary
parameters" field. Use an integer value which is a multiple of
_SC_PAGESIZE (typically *4096*) to avoid memory fragmentation. This
will increase Samba's memory requirements and should not be used on
systems with limited RAM.

If you wish to increase network performance, read the Samba section on
`socket options
<http://samba.org/samba/docs/man/manpages-3/smb.conf.5.html#SOCKETOPTIONS>`_.
It indicates which options are available and recommends that you
experiment to see which are supported by your clients and improve your
network's performance.

Windows automatically caches file sharing information. If you make
changes to a CIFS share or to the permissions of a volume/dataset
being shared by CIFS and are no longer able to access the share, try
logging out and back into the Windows system. Alternately, users can
type :command:`net use /delete` from the command line to clear their
SMB sessions.

Windows also automatically caches login information. If you want users
to be prompted to log in every time access is required, reduce the
cache settings on the client computers.

Where possible, avoid using a mix of case in filenames as this can
cause confusion for Windows users. `Representing and resolving
filenames with Samba
<http://www.oreilly.com/openbook/samba/book/ch05_04.html>`_ explains
in more detail.

If a particular user cannot connect to a CIFS share, make sure that
their password does not contain the *?* character. If it does, have
the user change the password and try again.

If permissions work for Windows users but not for OS X users, try
disabling "Unix Extensions" and restarting the CIFS service.

If the CIFS service will not start, run this command from :ref:`Shell`
to see if there is an error in the configuration::

 testparm /usr/local/etc/smb4.conf

If clients have problems connecting to the CIFS share, go to
:menuselection:`Services --> CIFS` and verify that "Server maximum
protocol" is set to "SMB2".

It is recommended to use a dataset for CIFS sharing. When creating the
dataset, make sure that the "Share type" is set to Windows.

**Do not** use :command:`chmod` to attempt to fix the permissions on a
CIFS share as it destroys the Windows ACLs. The correct way to manage
permissions on a CIFS share is to manage the share security from a
Windows system as either the owner of the share or a member of the
group that owns the share. To do so, right-click on the share, click
"Properties" and navigate to the "Security" tab. If you already
destroyed the ACLs using :command:`chmod`, :command:`winacl` can be
used to fix them. Type :command:`winacl` from :ref:`Shell` for usage
instructions.

The `Common Errors
<http://www.samba.org/samba/docs/man/Samba-HOWTO-Collection/domain-member.html#id2573692>`_
section of the Samba documentation contains additional troubleshooting
tips.

.. index:: Domain Controller, DC
.. _Domain Controller:

Domain Controller
-----------------

FreeNAS® can be configured to act either as the domain controller for
a network or to join an existing Active Directory network as a domain
controller.

.. note:: This section demonstrates how to configure the FreeNAS®
          system to act as a domain controller. If your goal is to
          integrate with an existing Active Directory network to
          access its authentication and authorization services,
          configure :ref:`Active Directory` instead.

Be aware that configuring a domain controller is a complex process
that requires a good understanding of how Active Directory works.
While :menuselection:`Services --> Domain Controller` makes it easy to
input the needed settings into the administrative graphical interface,
it is up to you to understand what those settings should be. Before
beginning your configuration, read through the `Samba AD DC HOWTO
<https://wiki.samba.org/index.php/Samba_AD_DC_HOWTO>`_. Once FreeNAS®
is configured, use the RSAT utility from a Windows system to manage
the domain controller. The Samba AD DC HOWTO includes instructions for
installing and configuring RSAT.

Figure 11.4a shows the configuration screen for creating a domain
controller and Table 11.4a summarizes the available options.

**Figure 11.4a: Domain Controller Settings**

.. image:: images/directory1a.png

**Table 11.4a: Domain Controller Configuration Options**

+------------------------+----------------+-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+
| **Setting**            | **Value**      | **Description**                                                                                                                                                                           |
|                        |                |                                                                                                                                                                                           |
|                        |                |                                                                                                                                                                                           |
+========================+================+===========================================================================================================================================================================================+
| Realm                  | string         | capitalized DNS realm name                                                                                                                                                                |
|                        |                |                                                                                                                                                                                           |
+------------------------+----------------+-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+
| Domain                 | string         | capitalized domain name                                                                                                                                                                   |
|                        |                |                                                                                                                                                                                           |
+------------------------+----------------+-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+
| Server Role            | drop-down menu | at this time, the only supported role is as the domain controller for a new domain                                                                                                        |
|                        |                |                                                                                                                                                                                           |
+------------------------+----------------+-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+
| DNS Forwarder          | string         | IP address of DNS forwarder; required for recursive queries when *SAMBA_INTERNAL* is selected                                                                                             |
|                        |                |                                                                                                                                                                                           |
+------------------------+----------------+-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+
| Domain Forest Level    | drop-down menu | choices are *2000*,                                                                                                                                                                       |
|                        |                | *2003*,                                                                                                                                                                                   |
|                        |                | *2008*, or                                                                                                                                                                                |
|                        |                | *2008_R2*; refer to                                                                                                                                                                       |
|                        |                | `Understanding Active Directory Domain Services (AD DS) Functional Levels <https://technet.microsoft.com/en-us/library/understanding-active-directory-functional-levels(WS.10).aspx>`_    |
|                        |                | for details                                                                                                                                                                               |
|                        |                |                                                                                                                                                                                           |
+------------------------+----------------+-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+
| Administrator password | string         | password to be used for the Active Directory administrator account                                                                                                                        |
|                        |                |                                                                                                                                                                                           |
+------------------------+----------------+-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+
| Kerberos Realm         | drop-down menu | this drop-down menu will auto-populate using the information from "Realm" when the settings in this screen are saved                                                                      |
|                        |                |                                                                                                                                                                                           |
+------------------------+----------------+-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+

.. index:: Dynamic DNS, DDNS
.. _Dynamic DNS:

Dynamic DNS
-----------

Dynamic DNS (DDNS) is useful if your FreeNAS® system is connected to
an ISP that periodically changes the IP address of the system. With
dynamic DNS, the system can automatically associate its current IP
address with a domain name, allowing you to access the FreeNAS® system
even if the IP address changes. DDNS requires you to register with a
DDNS service such as `DynDNS <http://dyn.com/dns/>`_.

Figure 11.5a shows the DDNS configuration screen and Table 11.5a
summarizes the configuration options. The values you need to input
will be given to you by the DDNS provider. After configuring DDNS,
don't forget to start the DDNS service in
:menuselection:`Services --> Control Services`.

**Figure 11.5a: Configuring DDNS**

.. image:: images/ddns.png

**Table 11.5a: DDNS Configuration Options**

+----------------------+----------------+--------------------------------------------------------------------------------------------------------------------+
| **Setting**          | **Value**      | **Description**                                                                                                    |
|                      |                |                                                                                                                    |
+======================+================+====================================================================================================================+
| Provider             | drop-down menu | several providers are supported; if your provider is not listed, leave this field blank and specify the custom     |
|                      |                | provider in the "Auxiliary parameters" field                                                                       |
|                      |                |                                                                                                                    |
+----------------------+----------------+--------------------------------------------------------------------------------------------------------------------+
| IP Server            | string         | can be used to specify the hostname and port of the IP check server                                                |
|                      |                |                                                                                                                    |
+----------------------+----------------+--------------------------------------------------------------------------------------------------------------------+
| Domain name          | string         | fully qualified domain name (e.g. *yourname.dyndns.org*)                                                           |
|                      |                |                                                                                                                    |
+----------------------+----------------+--------------------------------------------------------------------------------------------------------------------+
| Username             | string         | username used to logon to the provider and update the record                                                       |
|                      |                |                                                                                                                    |
+----------------------+----------------+--------------------------------------------------------------------------------------------------------------------+
| Password             | string         | password used to logon to the provider and update the record                                                       |
|                      |                |                                                                                                                    |
+----------------------+----------------+--------------------------------------------------------------------------------------------------------------------+
| Update period        | integer        | how often the IP is checked in seconds                                                                             |
+----------------------+----------------+--------------------------------------------------------------------------------------------------------------------+
| Forced update period | integer        | how often the IP should be updated, even it has not changed, in seconds                                            |
|                      |                |                                                                                                                    |
+----------------------+----------------+--------------------------------------------------------------------------------------------------------------------+
| Auxiliary parameters | string         | additional parameters passed to the provider during record update; an example of specifying a custom provider is   |
|                      |                | *dyndns_system default@provider.com*                                                                               |
|                      |                |                                                                                                                    |
+----------------------+----------------+--------------------------------------------------------------------------------------------------------------------+

If you are using freedns.afraid.org, see `this forum post
<https://forums.freenas.org/index.php?threads/dynamic-dns-and-freeedns-afraid-org.24455/#post-151746>`_
for an example working configuration.

.. index:: FTP, File Transfer Protocol
.. _FTP:

FTP
---

FreeNAS® uses the `proftpd <http://www.proftpd.org/>`_ FTP server to
provide FTP services. Once the FTP service is configured and started,
clients can browse and download data using a web browser or FTP client
software. The advantage of FTP is that easy-to-use cross-platform
utilities are available to manage uploads to and downloads from the
FreeNAS® system. The disadvantage of FTP is that it is considered to
be an insecure protocol, meaning that it should not be used to
transfer sensitive files. If you are concerned about sensitive data,
see Encrypting FTP.

This section provides an overview of the FTP configuration options. It
then provides examples for configuring anonymous FTP, specified user
access within a chroot environment, encrypting FTP connections, and
troubleshooting tips.

Figure 11.6a shows the configuration screen for
:menuselection:`Services --> FTP`. Some settings are only available in
"Advanced Mode". To see these settings, either click the "Advanced
Mode" button or configure the system to always display these settings
by checking the box "Show advanced fields by default" in
:menuselection:`System --> Advanced`.

**Figure 11.6a: Configuring FTP**

.. image:: images/ftp1.png

Table 11.6a summarizes the available options when configuring the FTP
server:

**Table 11.6a: FTP Configuration Options**

+---------------------------------------------------------------+----------------+-------------------------------------------------------------------------------------+
| **Setting**                                                   | **Value**      | **Description**                                                                     |
|                                                               |                |                                                                                     |
+===============================================================+================+=====================================================================================+
| Port                                                          | integer        | port the FTP service listens on                                                     |
|                                                               |                |                                                                                     |
+---------------------------------------------------------------+----------------+-------------------------------------------------------------------------------------+
| Clients                                                       | integer        | maximum number of simultaneous clients                                              |
|                                                               |                |                                                                                     |
+---------------------------------------------------------------+----------------+-------------------------------------------------------------------------------------+
| Connections                                                   | integer        | maximum number of connections per IP address where *0* means unlimited              |
|                                                               |                |                                                                                     |
+---------------------------------------------------------------+----------------+-------------------------------------------------------------------------------------+
| Login Attempts                                                | integer        | maximum number of attempts before client is disconnected; increase this if          |
|                                                               |                | users are prone to typos                                                            |
|                                                               |                |                                                                                     |
+---------------------------------------------------------------+----------------+-------------------------------------------------------------------------------------+
| Timeout                                                       | integer        | maximum client idle time in seconds before client is disconnected                   |
|                                                               |                |                                                                                     |
+---------------------------------------------------------------+----------------+-------------------------------------------------------------------------------------+
| Allow Root Login                                              | checkbox       | discouraged as increases security risk                                              |
|                                                               |                |                                                                                     |
+---------------------------------------------------------------+----------------+-------------------------------------------------------------------------------------+
| Allow Anonymous Login                                         | checkbox       | enables anonymous FTP logins with access to the directory specified in              |
|                                                               |                | "Path"                                                                              |
|                                                               |                |                                                                                     |
+---------------------------------------------------------------+----------------+-------------------------------------------------------------------------------------+
| Path                                                          | browse button  | root directory for anonymous FTP connections                                        |
|                                                               |                |                                                                                     |
+---------------------------------------------------------------+----------------+-------------------------------------------------------------------------------------+
| Allow Local User Login                                        | checkbox       | required if "Anonymous Login" is disabled                                           |
|                                                               |                |                                                                                     |
+---------------------------------------------------------------+----------------+-------------------------------------------------------------------------------------+
| Display Login                                                 | string         | message displayed to local login users after authentication; not displayed          |
|                                                               |                | to anonymous login users                                                            |
|                                                               |                |                                                                                     |
+---------------------------------------------------------------+----------------+-------------------------------------------------------------------------------------+
| File Permission                                               | checkboxes     | only available in "Advanced Mode"; sets default permissions for newly created       |
|                                                               |                | files                                                                               |
|                                                               |                |                                                                                     |
+---------------------------------------------------------------+----------------+-------------------------------------------------------------------------------------+
| Directory Permission                                          | checkboxes     | only available in "Advanced Mode"; sets default permissions for newly created       |
|                                                               |                | directories                                                                         |
|                                                               |                |                                                                                     |
+---------------------------------------------------------------+----------------+-------------------------------------------------------------------------------------+
| Enable                                                        | checkbox       | only available in "Advanced Mode"; enables File eXchange Protocol which is          |
| `FXP <https://en.wikipedia.org/wiki/File_eXchange_Protocol>`_ |                | discouraged as it makes the server vulnerable to FTP bounce attacks                 |
|                                                               |                |                                                                                     |
+---------------------------------------------------------------+----------------+-------------------------------------------------------------------------------------+
| Allow Transfer Resumption                                     | checkbox       | allows FTP clients to resume interrupted transfers                                  |
|                                                               |                |                                                                                     |
+---------------------------------------------------------------+----------------+-------------------------------------------------------------------------------------+
| Always Chroot                                                 | checkbox       | a local user is only allowed access to their home directory unless the user         |
|                                                               |                | is a member of group *wheel*                                                        |
|                                                               |                |                                                                                     |
+---------------------------------------------------------------+----------------+-------------------------------------------------------------------------------------+
| Require IDENT Authentication                                  | checkbox       | only available in "Advanced Mode"; will result in timeouts if :command:`identd` is  |
|                                                               |                | not running on the client                                                           |
|                                                               |                |                                                                                     |
+---------------------------------------------------------------+----------------+-------------------------------------------------------------------------------------+
| Perform Reverse DNS Lookups                                   | checkbox       | perform reverse DNS lookups on client IPs; can cause long delays if reverse         |
|                                                               |                | DNS is not configured                                                               |
|                                                               |                |                                                                                     |
+---------------------------------------------------------------+----------------+-------------------------------------------------------------------------------------+
| Masquerade address                                            | string         | public IP address or hostname; set if FTP clients cannot connect through a          |
|                                                               |                | NAT device                                                                          |
|                                                               |                |                                                                                     |
+---------------------------------------------------------------+----------------+-------------------------------------------------------------------------------------+
| Minimum passive port                                          | integer        | only available in "Advanced Mode"; used by clients in PASV mode, default of *0*     |
|                                                               |                | means any port above 1023                                                           |
|                                                               |                |                                                                                     |
+---------------------------------------------------------------+----------------+-------------------------------------------------------------------------------------+
| Maximum passive port                                          | integer        | only available in "Advanced Mode"; used by clients in PASV mode, default of *0*     |
|                                                               |                | means any port above 1023                                                           |
|                                                               |                |                                                                                     |
+---------------------------------------------------------------+----------------+-------------------------------------------------------------------------------------+
| Local user upload bandwidth                                   | integer        | only available in "Advanced Mode"; in KB/s, default of *0* means unlimited          |
|                                                               |                |                                                                                     |
+---------------------------------------------------------------+----------------+-------------------------------------------------------------------------------------+
| Local user download bandwidth                                 | integer        | only available in "Advanced Mode"; in KB/s, default of *0* means unlimited          |
|                                                               |                |                                                                                     |
+---------------------------------------------------------------+----------------+-------------------------------------------------------------------------------------+
| Anonymous user upload bandwidth                               | integer        | only available in "Advanced Mode"; in KB/s, default of *0* means unlimited          |
|                                                               |                |                                                                                     |
+---------------------------------------------------------------+----------------+-------------------------------------------------------------------------------------+
| Anonymous user download bandwidth                             | integer        | only available in "Advanced Mode"; in KB/s, default of *0*  means unlimited         |
|                                                               |                |                                                                                     |
+---------------------------------------------------------------+----------------+-------------------------------------------------------------------------------------+
| Enable TLS                                                    | checkbox       | only available in "Advanced Mode"; enables encrypted connections and requires a     |
|                                                               |                | certificate to be created or imported using :ref:`Certificates`                     |
|                                                               |                |                                                                                     |
+---------------------------------------------------------------+----------------+-------------------------------------------------------------------------------------+
| TLS policy                                                    | drop-down menu | only available in "Advanced Mode"; the selected policy defines whether the          |
|                                                               |                | control channel, data channel, both channels, or neither channel, of an FTP         |
|                                                               |                | session must occur over SSL/TLS; the policies are described                         |
|                                                               |                | `here <http://www.proftpd.org/docs/directives/linked/config_ref_TLSRequired.html>`_ |
|                                                               |                |                                                                                     |
+---------------------------------------------------------------+----------------+-------------------------------------------------------------------------------------+
| TLS allow client renegotiations                               | checkbox       | only available in "Advanced Mode"; checking this box is **not** recommended as      |
|                                                               |                | it breaks several security measures; for this and the rest of the TLS fields,       |
|                                                               |                | refer to                                                                            |
|                                                               |                | `mod_tls <http://www.proftpd.org/docs/contrib/mod_tls.html>`_                       |
|                                                               |                | for more details                                                                    |
|                                                               |                |                                                                                     |
+---------------------------------------------------------------+----------------+-------------------------------------------------------------------------------------+
| TLS allow dot login                                           | checkbox       | only available in "Advanced Mode"; if checked, the user's home directory is         |
|                                                               |                | checked for a :file:`.tlslogin` file which contains one or more PEM-encoded         |
|                                                               |                | certificates; if not found, the user will be prompted for password                  |
|                                                               |                | authentication                                                                      |
|                                                               |                |                                                                                     |
+---------------------------------------------------------------+----------------+-------------------------------------------------------------------------------------+
| TLS allow per user                                            | checkbox       | only available in "Advanced Mode"; if checked, the user's password may be sent      |
|                                                               |                | unencrypted                                                                         |
|                                                               |                |                                                                                     |
+---------------------------------------------------------------+----------------+-------------------------------------------------------------------------------------+
| TLS common name required                                      | checkbox       | only available in "Advanced Mode"; if checked, the common name in the               |
|                                                               |                | certificate must match the FQDN of the host                                         |
|                                                               |                |                                                                                     |
+---------------------------------------------------------------+----------------+-------------------------------------------------------------------------------------+
| TLS enable diagnostics                                        | checkbox       | only available in "Advanced Mode"; if checked when troubleshooting a                |
|                                                               |                | connection, will log more verbosely                                                 |
|                                                               |                |                                                                                     |
+---------------------------------------------------------------+----------------+-------------------------------------------------------------------------------------+
| TLS export certificate data                                   | checkbox       | only available in "Advanced Mode"; if checked, exports the certificate              |
|                                                               |                | environment variables                                                               |
|                                                               |                |                                                                                     |
+---------------------------------------------------------------+----------------+-------------------------------------------------------------------------------------+
| TLS no certificate request                                    | checkbox       | only available in "Advanced Mode"; try checking this box if the client cannot       |
|                                                               |                | connect and you suspect that the client software is not properly handling           |
|                                                               |                | the server's certificate request                                                    |
|                                                               |                |                                                                                     |
+---------------------------------------------------------------+----------------+-------------------------------------------------------------------------------------+
| TLS no empty fragments                                        | checkbox       | only available in "Advanced Mode"; checking this box is **not**                     |
|                                                               |                | recommended as it bypasses a security mechanism                                     |
|                                                               |                |                                                                                     |
+---------------------------------------------------------------+----------------+-------------------------------------------------------------------------------------+
| TLS no session reuse required                                 | checkbox       | only available in "Advanced Mode"; checking this box reduces the security of        |
|                                                               |                | the connection so only do so if the client does not understand reused SSL           |
|                                                               |                | sessions                                                                            |
|                                                               |                |                                                                                     |
+---------------------------------------------------------------+----------------+-------------------------------------------------------------------------------------+
| TLS export standard vars                                      | checkbox       | only available in "Advanced Mode"; if checked, sets several environment             |
|                                                               |                | variables                                                                           |
|                                                               |                |                                                                                     |
+---------------------------------------------------------------+----------------+-------------------------------------------------------------------------------------+
| TLS DNS name required                                         | checkbox       | only available in "Advanced Mode"; if checked, the client's DNS name must           |
|                                                               |                | resolve to its IP address and the cert must contain the same DNS name               |
|                                                               |                |                                                                                     |
+---------------------------------------------------------------+----------------+-------------------------------------------------------------------------------------+
| TLS IP address required                                       | checkbox       | only available in "Advanced Mode"; if checked, the client's certificate must        |
|                                                               |                | contain the IP address that matches the IP address of the client                    |
|                                                               |                |                                                                                     |
+---------------------------------------------------------------+----------------+-------------------------------------------------------------------------------------+
| Certificate                                                   | drop-down menu | the SSL certificate to be used for TLS FTP connections; to create a certificate,    |
|                                                               |                | use `System --> Certificates`                                                       |
|                                                               |                |                                                                                     |
+---------------------------------------------------------------+----------------+-------------------------------------------------------------------------------------+
| Auxiliary parameters                                          | string         | only available in "Advanced Mode"; used to add                                      |
|                                                               |                | `proftpd(8) <http://linux.die.net/man/8/proftpd>`_                                  |
|                                                               |                | parameters not covered elsewhere in this screen                                     |
|                                                               |                |                                                                                     |
+---------------------------------------------------------------+----------------+-------------------------------------------------------------------------------------+


This example demonstrates the auxiliary parameters that prevent all
users from performing the FTP DELETE command::

 <Limit DELE>
 DenyAll
 </Limit>

.. _Anonymous FTP:

Anonymous FTP
~~~~~~~~~~~~~

Anonymous FTP may be appropriate for a small network where the
FreeNAS® system is not accessible from the Internet and everyone in
your internal network needs easy access to the stored data. Anonymous
FTP does not require you to create a user account for every user. In
addition, passwords are not required so you don't have to manage
changed passwords on the FreeNAS® system.

To configure anonymous FTP:

#.  Give the built-in ftp user account permissions to the
    volume/dataset to be shared in
    :menuselection:`Storage --> Volumes` as follows:

    * "Owner(user)": select the built-in *ftp* user from the drop-down
      menu

    * "Owner(group)": select the built-in *ftp* group from the
      drop-down menu

    * "Mode": review that the permissions are appropriate for the
      share

    .. note:: For FTP, the type of client does not matter when it
              comes to the type of ACL. This means that you always use
              Unix ACLs, even if Windows clients will be accessing
              FreeNAS® via FTP.

#.  Configure anonymous FTP in :menuselection:`Services --> FTP` by
    setting the following attributes:

    * check the box "Allow Anonymous Login"

    * "Path": browse to the volume/dataset/directory to be shared

#.  Start the FTP service in
    :menuselection:`Services --> Control Services`. Click the red
    "OFF" button next to FTP. After a second or so, it will change to
    a blue "ON", indicating that the service has been enabled.

#.  Test the connection from a client using a utility such as
    `Filezilla <https://filezilla-project.org/>`_.

In the example shown in Figure 11.6b, a user has input the following
information into the Filezilla client:

* IP address of the FreeNAS® server: *192.168.1.113*

* "Username": *anonymous*

* "Password": the email address of the user

**Figure 11.6b: Connecting Using Filezilla**

.. image:: images/filezilla.png

The messages within the client indicate that the FTP connection is
successful. The user can now navigate the contents of the root folder
on the remote site—this is the volume/dataset that was specified in
the FTP service configuration. The user can also transfer files
between the local site (their system) and the remote site (the
FreeNAS® system).

.. _FTP in chroot:

FTP in chroot
~~~~~~~~~~~~~

If you require your users to authenticate before accessing the data on
the FreeNAS® system, you will need to either create a user account for
each user or import existing user accounts using Active Directory or
LDAP. If you then create a ZFS dataset for each user, you can chroot
each user so that they are limited to the contents of their own home
directory. Datasets provide the added benefit of configuring a quota
so that the size of the user's home directory is limited to the size
of the quota.

To configure this scenario:

#.  Create a ZFS dataset for each user in
    :menuselection:`Storage --> Volumes`. Click an existing
    :menuselection:`ZFS volume --> Create ZFS Dataset` and set
    an appropriate quota for each dataset. Repeat this process to
    create a dataset for every user that needs access to the FTP
    service.

#.  If you are not using AD or LDAP, create a user account for each
    user in :menuselection:`Account --> Users --> Add User`. For each
    user, browse to the dataset created for that user in the "Home
    Directory" field. Repeat this process to create a user account for
    every user that needs access to the FTP service, making sure to
    assign each user their own dataset.

#.  Set the permissions for each dataset in
    :menuselection:`Storage --> Volumes`. Click the "Change
    Permissions" button for a dataset to assign a user account as
    "Owner" of that dataset and to set the desired permissions for
    that user. Repeat for each dataset.

    .. note:: For FTP, the type of client does not matter when it
              comes to the type of ACL. This means that you always use
              Unix ACLs, even if Windows clients will be accessing
              FreeNAS® via FTP.

#.  Configure FTP in :menuselection:`Services --> FTP` with these
    attributes:

    * "Path": browse to the parent volume containing the datasets

    * make sure the boxes for "Allow Anonymous Login" and "Allow Root
      Login" are **unchecked**

    * check the box "Allow Local User Login"

    * check the box "Always Chroot"

#.  Start the FTP service in
    :menuselection:`Services --> Control Services`. Click the red
    "OFF" button next to FTP. After a second or so, it will change to
    a blue "ON", indicating that the service has been enabled.

#.  Test the connection from a client using a utility such as
    Filezilla.

To test this configuration in Filezilla, use the IP address of the
FreeNAS® system, the Username of a user that has been associated with
a dataset, and the Password for that user. The messages should
indicate that the authorization and the FTP connection are successful.
The user can now navigate the contents of the root folder on the
remote site—this time it is not the entire volume but the dataset that
was created for that user. The user should be able to transfer files
between the local site (their system) and the remote site (their
dataset on the FreeNAS® system).

.. _Encrypting FTP:

Encrypting FTP
~~~~~~~~~~~~~~

To configure any FTP scenario to use encrypted connections:

#.  Import or create a certificate authority using the instructions in
    :ref:`CAs`. Then, import or create the certificate to use for
    encrypted connections using the instructions in
    :ref:`Certificates`.

#.  In :menuselection:`Services --> FTP`, check the box "Enable TLS"
    and select the certificate in the "Certificate" drop-down menu.

#.  Specify secure FTP when accessing the FreeNAS® system. For
    example, in Filezilla input *ftps://IP_address* (for an implicit
    connection) or *ftpes://IP_address* (for an explicit connection)
    as the Host when connecting. The first time a user connects, they
    will be presented with the certificate of the FreeNAS® system.
    Click "OK" to accept the certificate and negotiate an encrypted
    connection.

#.  To force encrypted connections, select *on* for the "TLS Policy".

.. _Troubleshooting FTP:

Troubleshooting FTP
~~~~~~~~~~~~~~~~~~~

The FTP service will not start if it cannot resolve the system's
hostname to an IP address using DNS. To see if the FTP service is
running, open :ref:`Shell` and issue the command::

 sockstat -4p 21

If there is nothing listening on port 21, the FTP service isn't
running. To see the error message that occurs when FreeNAS® tries to
start the FTP service, go to :menuselection:`System --> Advanced`,
check the box "Show console messages in the footer" and click "Save".
Next, go to :menuselection:`Services --> Control Services` and switch
the FTP service off then back on in the GUI. Watch the console
messages at the bottom of the browser for errors.

If the error refers to DNS, either create an entry in your local DNS
server with the FreeNAS® system's hostname and IP address or add an
entry for the IP address of the FreeNAS® system in the "Host name
database" field of :menuselection:`Network --> Global Configuration`.

.. _iSCSI:

iSCSI
-----

Refer to :ref:`Block (iSCSI)` for instructions on configuring iSCSI.
To start the iSCSI service, click its entry in "Services".

.. note:: A warning message is shown if you stop the iSCSI service
          when initiators are connected. Type :command:`ctladm islist`
          to determine the names of the connected initiators.

.. index:: LLDP, Link Layer Discovery Protocol
.. _LLDP:

LLDP
----

The Link Layer Discovery Protocol (LLDP) is used by network devices to
advertise their identity, capabilities, and neighbors on an Ethernet
network. FreeNAS® uses the `ladvd <https://github.com/sspans/ladvd>`_
LLDP implementation. If your network contains managed switches,
configuring and starting the LLDP service will tell the FreeNAS®
system to advertise itself on the network.

Figure 11.8a shows the LLDP configuration screen and Table 11.8a
summarizes the configuration options for the LLDP service.

**Figure 11.8a: Configuring LLDP**

.. image:: images/lldp.png

**Table 11.8a: LLDP Configuration Options**

+------------------------+------------+---------------------------------------------------------------------------------------------------------------------+
| **Setting**            | **Value**  | **Description**                                                                                                     |
|                        |            |                                                                                                                     |
+========================+============+=====================================================================================================================+
| Interface Description  | checkbox   | when checked, receive mode is enabled and received peer information is saved in interface descriptions              |
|                        |            |                                                                                                                     |
+------------------------+------------+---------------------------------------------------------------------------------------------------------------------+
| Country Code           | string     | required for LLDP location support; input 2 letter ISO 3166 country code                                            |
|                        |            |                                                                                                                     |
+------------------------+------------+---------------------------------------------------------------------------------------------------------------------+
| Location               | string     | optional; specify the physical location of the host                                                                 |
|                        |            |                                                                                                                     |
+------------------------+------------+---------------------------------------------------------------------------------------------------------------------+

.. index:: NFS, Network File System
.. _NFS:

NFS
---

The settings that are configured when creating NFS Shares in
:menuselection:`Sharing --> Unix (NFS) Shares --> Add Unix (NFS)
Share` are specific to each configured NFS Share. In contrast, global
settings which apply to all NFS shares are configured in
:menuselection:`Services --> NFS`.

Figure 11.9a shows the configuration screen and Table 11.9a summarizes
the configuration options for the NFS service.

**Figure 11.9a: Configuring NFS**

.. image:: images/nfs1c.png

**Table 11.9a: NFS Configuration Options**

+------------------------+------------+---------------------------------------------------------------------------------------------------------------------+
| **Setting**            | **Value**  | **Description**                                                                                                     |
|                        |            |                                                                                                                     |
+========================+============+=====================================================================================================================+
| Number of servers      | integer    | run :command:`sysctl -n kern.smp.cpus` from Shell to determine the number; do not exceed the number listed in the   |
|                        |            | output of that command                                                                                              |
|                        |            |                                                                                                                     |
+------------------------+------------+---------------------------------------------------------------------------------------------------------------------+
| Serve UDP NFS clients  | checkbox   | check if NFS client needs to use UDP                                                                                |
|                        |            |                                                                                                                     |
+------------------------+------------+---------------------------------------------------------------------------------------------------------------------+
| Bind IP Addresses      | checkboxes | select the IP address(es) to listen for NFS requests; if left unchecked, NFS will listen on all available addresses |
|                        |            |                                                                                                                     |
+------------------------+------------+---------------------------------------------------------------------------------------------------------------------+
| Allow non-root mount   | checkbox   | check this box only if the NFS client requires it                                                                   |
|                        |            |                                                                                                                     |
+------------------------+------------+---------------------------------------------------------------------------------------------------------------------+
| Enable NFSv4           | checkbox   | the default is to use NFSv3, check this box to switch to NFSv4                                                      |
|                        |            |                                                                                                                     |
+------------------------+------------+---------------------------------------------------------------------------------------------------------------------+
| NFSv3 ownership model  | checkbox   | greyed out unless "Enable NFSv4" is checked and, in turn, will grey out "Support>16 groups" which is incompatible;  |
| for NFSv4              |            | check this box if NFSv4 ACL support is needed without requiring the client and the server to sync users and groups  |
|                        |            |                                                                                                                     |
+------------------------+------------+---------------------------------------------------------------------------------------------------------------------+
| Require Kerberos for   | checkbox   | when checked, NFS shares will fail if the Kerberos ticket is unavailable                                            |
| NFSv4                  |            |                                                                                                                     |
|                        |            |                                                                                                                     |
+------------------------+------------+---------------------------------------------------------------------------------------------------------------------+
| mountd(8) bind port    | integer    | optional; specify port for                                                                                          |
|                        |            | `mountd(8) <http://www.freebsd.org/cgi/man.cgi?query=mountd>`_                                                      |
|                        |            | to bind to                                                                                                          |
|                        |            |                                                                                                                     |
+------------------------+------------+---------------------------------------------------------------------------------------------------------------------+
| rpc.statd(8) bind port | integer    | optional; specify port for                                                                                          |
|                        |            | `rpc.statd(8) <http://www.freebsd.org/cgi/man.cgi?query=rpc.statd>`_                                                |
|                        |            | to bind to                                                                                                          |
|                        |            |                                                                                                                     |
+------------------------+------------+---------------------------------------------------------------------------------------------------------------------+
| rpc.lockd(8) bind port | integer    | optional; specify port for                                                                                          |
|                        |            | `rpc.lockd(8) <http://www.freebsd.org/cgi/man.cgi?query=rpc.lockd>`_                                                |
|                        |            | to bind to                                                                                                          |
|                        |            |                                                                                                                     |
+------------------------+------------+---------------------------------------------------------------------------------------------------------------------+
| Support>16 groups      |            | check this box if any users are members of more than 16 groups (useful in AD environments); note that this assumes  |
|                        |            | that group membership has been configured correctly on the NFS server                                               |
|                        |            |                                                                                                                     |
+------------------------+------------+---------------------------------------------------------------------------------------------------------------------+

.. index:: Rsync
.. _Rsync:

Rsync
-----

:menuselection:`Services --> Rsync` is used to configure an rsync
server when using rsync module mode. See the section on Rsync Module
Mode for a configuration example.

This section describes the configurable options for the
:command:`rsyncd` service and rsync modules.

.. _Configure Rsyncd:

Configure Rsyncd
~~~~~~~~~~~~~~~~

Figure 11.10a shows the rsyncd configuration screen which is accessed
from :menuselection:`Services --> Rsync --> Configure Rsyncd`.

**Figure 11.10a: Rsyncd Configuration**

.. image:: images/rsyncd.png

Table 11.10a summarizes the options that can be configured for the
rsync daemon:

**Table 11.10a: Rsync Configuration Options**

+----------------------+-----------+----------------------------------------------------------------------+
| **Setting**          | **Value** | **Description**                                                      |
|                      |           |                                                                      |
|                      |           |                                                                      |
+======================+===========+======================================================================+
| TCP Port             | integer   | port for :command:`rsyncd` to listen on, default is *873*            |
|                      |           |                                                                      |
+----------------------+-----------+----------------------------------------------------------------------+
| Auxiliary parameters | string    | additional parameters from                                           |
|                      |           | `rsyncd.conf(5) <https://www.samba.org/ftp/rsync/rsyncd.conf.html>`_ |
|                      |           |                                                                      |
+----------------------+-----------+----------------------------------------------------------------------+

.. _Rsync Modules:

Rsync Modules
~~~~~~~~~~~~~

Figure 11.10b shows the configuration screen that appears when you
click :menuselection:`Services --> Rsync --> Rsync Modules --> Add
Rsync Module`.

Table 11.10b summarizes the options that can be configured when
creating a rsync module.

**Figure 11.10b: Adding an Rsync Module**

.. image:: images/rsync3.png

**Table 11.10b: Rsync Module Configuration Options**

+----------------------+----------------+-------------------------------------------------------------------------------+
| **Setting**          | **Value**      | **Description**                                                               |
|                      |                |                                                                               |
|                      |                |                                                                               |
+======================+================+===============================================================================+
| Module name          | string         | mandatory; needs to match the setting on the rsync client                     |
|                      |                |                                                                               |
+----------------------+----------------+-------------------------------------------------------------------------------+
| Comment              | string         | optional description                                                          |
|                      |                |                                                                               |
+----------------------+----------------+-------------------------------------------------------------------------------+
| Path                 | browse button  | volume/dataset to hold received data                                          |
|                      |                |                                                                               |
+----------------------+----------------+-------------------------------------------------------------------------------+
| Access Mode          | drop-down menu | choices are *Read and Write*,                                                 |
|                      |                | *Read-only*, or                                                               |
|                      |                | *Write-only*                                                                  |
|                      |                |                                                                               |
|                      |                |                                                                               |
+----------------------+----------------+-------------------------------------------------------------------------------+
| Maximum connections  | integer        | *0* is unlimited                                                              |
|                      |                |                                                                               |
+----------------------+----------------+-------------------------------------------------------------------------------+
| User                 | drop-down menu | select user that file transfers to and from that module should take place as  |
|                      |                |                                                                               |
+----------------------+----------------+-------------------------------------------------------------------------------+
| Group                | drop-down menu | select group that file transfers to and from that module should take place as |
|                      |                |                                                                               |
+----------------------+----------------+-------------------------------------------------------------------------------+
| Hosts allow          | string         | see                                                                           |
|                      |                | `rsyncd.conf(5) <https://www.samba.org/ftp/rsync/rsyncd.conf.html>`_          |
|                      |                | for allowed formats                                                           |
|                      |                |                                                                               |
+----------------------+----------------+-------------------------------------------------------------------------------+
| Hosts deny           | string         | see rsyncd.conf(5) for allowed formats                                        |
|                      |                |                                                                               |
+----------------------+----------------+-------------------------------------------------------------------------------+
| Auxiliary parameters | string         | additional parameters from rsyncd.conf(5)                                     |
|                      |                |                                                                               |
+----------------------+----------------+-------------------------------------------------------------------------------+

.. index:: S.M.A.R.T.
.. _S.M.A.R.T.:

S.M.A.R.T.
----------

FreeNAS® uses the `smartd(8)
<http://www.smartmontools.org/browser/trunk/smartmontools/smartd.8.in>`_
service to monitor disk S.M.A.R.T. data for disk health. To fully
configure S.M.A.R.T. you need to:

#.  Schedule when to run the S.M.A.R.T. tests in
    :menuselection:`Tasks --> S.M.A.R.T. Tests --> Add S.M.A.R.T.
    Test`.

#.  Enable or disable S.M.A.R.T. for each disk member of a volume in
    :menuselection:`Volumes --> View Volumes`. By default, this is
    already enabled on all disks that support S.M.A.R.T.

#.  Check the configuration of the S.M.A.R.T. service as described in
    this section.

#.  Start the S.M.A.R.T. service in
    :menuselection:`Services --> Control Services`.

Figure 11.11a shows the configuration screen that appears when you
click :menuselection:`Services --> S.M.A.R.T.`

**Figure 11.11a: S.M.A.R.T Configuration Options**

.. image:: images/smart2.png

.. note:: :command:`smartd` will wake up at every configured "Check
          Interval". It will check the times you configured in
          :menuselection:`Tasks --> S.M.A.R.T. Tests` to see if any
          tests should be run. Since the smallest time increment for a
          test is an hour (60 minutes), it does not make sense to set
          a "Check Interval" value higher than 60 minutes. For
          example, if you set the "Check Interval" for *120* minutes
          and the smart test to every hour, the test will only be run
          every 2 hours since the daemon only wakes up every 2 hours.

Table 11.11a summarizes the options in the S.M.A.R.T configuration
screen.

**Table 11.11a: S.M.A.R.T Configuration Options**

+-----------------+----------------------------+-------------------------------------------------------------------------------------------------------------+
| **Setting**     | **Value**                  | **Description**                                                                                             |
|                 |                            |                                                                                                             |
|                 |                            |                                                                                                             |
+=================+============================+=============================================================================================================+
| Check interval  | integer                    | in minutes, how often to wake up :command:`smartd` to check to see if any tests have been configured to run |
|                 |                            |                                                                                                             |
+-----------------+----------------------------+-------------------------------------------------------------------------------------------------------------+
| Power mode      | drop-down menu             | the configured test is not performed if the system enters the specified power mode; choices are:            |
|                 |                            | *Never*,                                                                                                    |                                                       
|                 |                            | *Sleep*,                                                                                                    |                                      
|                 |                            | *Standby*, or                                                                                               |
|                 |                            | *Idle*                                                                                                      |
|                 |                            |                                                                                                             |
+-----------------+----------------------------+-------------------------------------------------------------------------------------------------------------+
| Difference      | integer in degrees Celsius | default of *0* disables this check, otherwise reports if the temperature of a drive has changed by N        |
|                 |                            | degrees Celsius since last report                                                                           |
|                 |                            |                                                                                                             |
+-----------------+----------------------------+-------------------------------------------------------------------------------------------------------------+
| Informational   | integer in degrees Celsius | default of *0* disables this check, otherwise will message with a log level of LOG_INFO if the temperature  |
|                 |                            | is higher than specified degrees in Celsius                                                                 |
|                 |                            |                                                                                                             |
+-----------------+----------------------------+-------------------------------------------------------------------------------------------------------------+
| Critical        | integer in degrees Celsius | default of *0* disables this check, otherwise will message with a log level of LOG_CRIT and send an email   |
|                 |                            | if the temperature is higher than specified degrees in Celsius                                              |
|                 |                            |                                                                                                             |
+-----------------+----------------------------+-------------------------------------------------------------------------------------------------------------+
| Email to report | string                     | email address of person or alias to receive S.M.A.R.T. alerts                                               |
|                 |                            |                                                                                                             |
+-----------------+----------------------------+-------------------------------------------------------------------------------------------------------------+

.. index:: SNMP, Simple Network Management Protocol
.. _SNMP:

SNMP
----

SNMP (Simple Network Management Protocol) is used to monitor
network-attached devices for conditions that warrant administrative
attention. FreeNAS® uses
`Net-SNMP <http://net-snmp.sourceforge.net/>`_ to provide SNMP. When
you start the SNMP service, the following port will be enabled on the
FreeNAS® system:

* UDP 161 (listens here for SNMP requests)

Available MIBS are located in :file:`/usr/local/share/snmp/mibs`.

Figure 11.12a shows the SNMP configuration screen. Table 11.12a
summarizes the configuration options.

**Figure 11.12a: Configuring SNMP**

.. image:: images/snmp2a.png

**Table 11.12a: SNMP Configuration Options**

+----------------------+----------------+--------------------------------------------------------------------------------------------------+
| **Setting**          | **Value**      | **Description**                                                                                  |
|                      |                |                                                                                                  |
+======================+================+==================================================================================================+
| Location             | string         | optional description of system's location                                                        |
|                      |                |                                                                                                  |
+----------------------+----------------+--------------------------------------------------------------------------------------------------+
| Contact              | string         | optional email address of administrator                                                          |
|                      |                |                                                                                                  |
+----------------------+----------------+--------------------------------------------------------------------------------------------------+
| SNMP v3 Support      | checkbox       | check this box to enable support for SNMP version 3                                              |
|                      |                |                                                                                                  |
+----------------------+----------------+--------------------------------------------------------------------------------------------------+
| Community            | string         | password used on the SNMP network, default is *public* and                                       |
|                      |                | **should be changed for security reasons**; this value can be empty for SNMPv3 networks          |
|                      |                |                                                                                                  |
+----------------------+----------------+--------------------------------------------------------------------------------------------------+
| Username             | string         | only applies if "SNMP v3 Support" is checked; specify the username to register with this service;|
|                      |                | refer to `snmpd.conf(5) <http://net-snmp.sourceforge.net/docs/man/snmpd.conf.html>`_ for more    |
|                      |                | information regarding the configuration of this setting as well as the "Authentication Type",    |
|                      |                | "Password", "Privacy Protocol", and "Privacy Passphrase" fields                                  |
|                      |                |                                                                                                  |
+----------------------+----------------+--------------------------------------------------------------------------------------------------+
| Authentication Type  | drop-down menu | only applies if "SNMP v3 Support" is checked; choices are *MD5* or                               |
|                      |                | *SHA*                                                                                            |
|                      |                |                                                                                                  |
+----------------------+----------------+--------------------------------------------------------------------------------------------------+
| Password             | string         | only applies if "SNMP v3 Support" is checked; specify and confirm a password of at least 8       |
|                      |                | characters                                                                                       |
+----------------------+----------------+--------------------------------------------------------------------------------------------------+
| Privacy Protocol     | drop-down menu | only applies if "SNMP v3 Support" is checked; choices are *AES* or                               |
|                      |                | *DES*                                                                                            |
|                      |                |                                                                                                  |
+----------------------+----------------+--------------------------------------------------------------------------------------------------+
| Privacy Passphrase   | string         | if not specified, "Password" is used                                                             |
|                      |                |                                                                                                  |
+----------------------+----------------+--------------------------------------------------------------------------------------------------+
| Auxiliary Parameters | string         | additional `snmpd.conf(5) <http://net-snmp.sourceforge.net/docs/man/snmpd.conf.html>`_ options   |
|                      |                | not covered in this screen, one per line                                                         |
|                      |                |                                                                                                  |
+----------------------+----------------+--------------------------------------------------------------------------------------------------+


.. index:: SSH, Secure Shell
.. _SSH:

SSH
---

Secure Shell (SSH) allows for files to be transferred securely over an
encrypted network. If you configure your FreeNAS® system as an SSH
server, the users in your network will need to use `SSH client
software <https://en.wikipedia.org/wiki/Comparison_of_SSH_clients>`_
to transfer files with SSH.

This section shows the FreeNAS® SSH configuration options,
demonstrates an example configuration that restricts users to their
home directory, and provides some troubleshooting tips.

Figure 11.13a shows the :menuselection:`Services --> SSH`
configuration screen. After configuring SSH, remember to start it in
:menuselection:`Services --> Control Services`.

**Figure 11.13a: SSH Configuration**

.. image:: images/ssh1.png

Table 11.13a summarizes the configuration options. Some settings are
only available in "Advanced Mode". To see these settings, either click
the "Advanced Mode" button or configure the system to always display
these settings by checking the box "Show advanced fields by default"
in :menuselection:`System --> Advanced`.

**Table 11.13a: SSH Configuration Options**

+-------------------------------+----------------+----------------------------------------------------------------------------------------------------------+
| **Setting**                   | **Value**      | **Description**                                                                                          |
|                               |                |                                                                                                          |
+===============================+================+==========================================================================================================+
| Bind Interfaces               | selection      | only available in "Advanced Mode"; by default, SSH listens on all interfaces unless you specify which    |
|                               |                | interfaces by highlighting them in the "Available" field and adding them to the "Selected" field         |
|                               |                |                                                                                                          |
+-------------------------------+----------------+----------------------------------------------------------------------------------------------------------+
| TCP Port                      | integer        | port to open for SSH connection requests; *22* by default                                                |
|                               |                |                                                                                                          |
+-------------------------------+----------------+----------------------------------------------------------------------------------------------------------+
| Login as Root with password   | checkbox       | **for security reasons, root logins are discouraged and disabled by default** if enabled, password must  |
|                               |                | be set for *root* user in "View Users"                                                                   |
|                               |                |                                                                                                          |
+-------------------------------+----------------+----------------------------------------------------------------------------------------------------------+
| Allow Password Authentication | checkbox       | if unchecked, key based authentication for all users is required; requires                               |
|                               |                | `additional setup <http://the.earth.li/%7Esgtatham/putty/0.55/htmldoc/Chapter8.html>`_                   |
|                               |                | on both the SSH client and server                                                                        |
|                               |                |                                                                                                          |
+-------------------------------+----------------+----------------------------------------------------------------------------------------------------------+
| Allow Kerberos Authentication | checkbox       | before checking this box, ensure that :ref:`Kerberos Realms` and :ref:`Kerberos Keytabs` have been       |
|                               |                | configured and that the FreeNAS system can communicate with the KDC                                      |
|                               |                |                                                                                                          |
+-------------------------------+----------------+----------------------------------------------------------------------------------------------------------+
| Allow TCP Port Forwarding     | checkbox       | allows users to bypass firewall restrictions using SSH's                                                 |
|                               |                | `port forwarding feature <http://www.symantec.com/connect/articles/ssh-port-forwarding>`_                |
|                               |                |                                                                                                          |
+-------------------------------+----------------+----------------------------------------------------------------------------------------------------------+
| Compress Connections          | checkbox       | may reduce latency over slow networks                                                                    |
|                               |                |                                                                                                          |
+-------------------------------+----------------+----------------------------------------------------------------------------------------------------------+
| SFTP Log Level                | drop-down menu | only available in "Advanced Mode"; select the                                                            |
|                               |                | `syslog(3) <http://www.freebsd.org/cgi/man.cgi?query=syslog>`_                                           |
|                               |                | level of the SFTP server                                                                                 |
|                               |                |                                                                                                          |
+-------------------------------+----------------+----------------------------------------------------------------------------------------------------------+
| SFTP Log Facility             | drop-down menu | only available in "Advanced Mode"; select the                                                            |
|                               |                | `syslog(3) <http://www.freebsd.org/cgi/man.cgi?query=syslog>`_                                           |
|                               |                | facility of the SFTP server                                                                              |
|                               |                |                                                                                                          |
+-------------------------------+----------------+----------------------------------------------------------------------------------------------------------+
| Extra Options                 | string         | only available in "Advanced Mode"; additional                                                            |
|                               |                | `sshd_config(5) <http://www.freebsd.org/cgi/man.cgi?query=sshd_config>`_                                 |
|                               |                | options not covered in this screen, one per line; these options are case-sensitive and mis-spellings may |
|                               |                | prevent the SSH service from starting                                                                    |
|                               |                |                                                                                                          |
+-------------------------------+----------------+----------------------------------------------------------------------------------------------------------+


A few `sshd_config(5)
<http://www.freebsd.org/cgi/man.cgi?query=sshd_config>`_ options that
are useful to enter in the "Extra Options" field include:

*  increase the *ClientAliveInterval* if SSH connections tend to drop

* *ClientMaxStartup* defaults to *10*; increase this value if you need
  more concurrent SSH connections

.. index:: SCP, Secure Copy
.. _SCP Only:

SCP Only
~~~~~~~~

When you configure SSH, authenticated users with a user account
created using :menuselection:`Account --> Users --> Add User` can use
the :command:`ssh` command to login to the FreeNAS® system over the
network. A user's home directory will be the volume/dataset specified
in the "Home Directory" field of their FreeNAS® user account. While
the SSH login will default to the user's home directory, users are
able to navigate outside of their home directory which can pose a
security risk.

It is possible to allow users to use the :command:`scp` and
:command:`sftp` commands to transfer files between their local
computer and their home directory on the FreeNAS® system, while
restricting them from logging into the system using :command:`ssh`. To
configure this scenario, go to
:menuselection:`Account --> Users --> View Users`, select the user and
click "Modify User", and change the user's "Shell" to
*scponly*. Repeat for each user that needs restricted SSH access.

Test the configuration from another system by running the
:command:`sftp`, :command:`ssh`, and :command:`scp` commands as the
user. The :command:`sftp` and :command:`scp` commands should work but
the :command:`ssh` should fail.

.. note:: Some utilities such as WinSCP and Filezilla can bypass the
          scponly shell. This section assumes that users are accessing
          the system using the command line versions of :command:`scp`
          and :command:`sftp`.

.. _Troubleshooting SSH:

Troubleshooting SSH
~~~~~~~~~~~~~~~~~~~

If you add any "Extra Options", be aware that the keywords listed in
`sshd_config(5)
<http://www.freebsd.org/cgi/man.cgi?query=sshd_config>`_ are case
sensitive. This means that your configuration will fail to do what you
intended if you do not match the upper and lowercase letters of the
keyword.

If your clients are receiving "reverse DNS" or timeout errors, add an
entry for the IP address of the FreeNAS® system in the "Host name
database" field of :menuselection:`Network --> Global Configuration`.

When configuring SSH, always test your configuration as an SSH user
account to ensure that the user is limited to what you have configured
and that they have permission to transfer files within the intended
directories. If the user account is experiencing problems, the SSH
error messages are usually pretty specific to what the problem is.
Type the following command within :ref:`Shell` to read these messages
as they occur::

 tail -f /var/log/messages

Additional messages regarding authentication errors may be found in
:file:`/var/log/auth.log`.

.. index:: TFTP, Trivial File Transfer Protocol
.. _TFTP:

TFTP
----

Trivial File Transfer Protocol (TFTP) is a light-weight version of FTP
usually used to transfer configuration or boot files between machines,
such as routers, in a local environment. TFTP provides an extremely
limited set of commands and provides no authentication.

If the FreeNAS® system will be used to store images and configuration
files for the network's devices, configure and start the TFTP service.
Starting the TFTP service will open UDP port 69.

Figure 11.14a shows the TFTP configuration screen and Table 11.14a
summarizes the available options:

**Figure 11.14a: TFTP Configuration**

.. image:: images/tftp.png

**Table 11.14a: TFTP Configuration Options**

+-----------------+---------------+--------------------------------------------------------------------------------------------------------------------------+
| **Setting**     | **Value**     | **Description**                                                                                                          |
|                 |               |                                                                                                                          |
+=================+===============+==========================================================================================================================+
| Directory       | browse button | browse to an **existing** directory to be used for storage; some devices require a specific directory name, refer to the |
|                 |               | device's documentation for details                                                                                       |
|                 |               |                                                                                                                          |
+-----------------+---------------+--------------------------------------------------------------------------------------------------------------------------+
| Allow New Files | checkbox      | enable if network devices need to send files to the system (e.g. backup their config)                                    |
|                 |               |                                                                                                                          |
+-----------------+---------------+--------------------------------------------------------------------------------------------------------------------------+
| Port            | integer       | UDP port to listen for TFTP requests, *69* by default                                                                    |
|                 |               |                                                                                                                          |
+-----------------+---------------+--------------------------------------------------------------------------------------------------------------------------+
| Username        | drop-down     | account used for tftp requests; must have permission to the "Directory"                                                  |
|                 | menu          |                                                                                                                          |
|                 |               |                                                                                                                          |
|                 |               |                                                                                                                          |
+-----------------+---------------+--------------------------------------------------------------------------------------------------------------------------+
| Umask           | integer       | umask for newly created files, default is *022* (everyone can read, nobody can write); some devices require a less       |
|                 |               | strict umask                                                                                                             |
|                 |               |                                                                                                                          |
+-----------------+---------------+--------------------------------------------------------------------------------------------------------------------------+
| Extra options   | string        | additional                                                                                                               |
|                 |               | `tftpd(8) <http://www.freebsd.org/cgi/man.cgi?query=tftpd>`_                                                             |
|                 |               | options not shown in this screen, one per line                                                                           |
|                 |               |                                                                                                                          |
+-----------------+---------------+--------------------------------------------------------------------------------------------------------------------------+

.. index:: UPS, Uninterruptible Power Supply
.. _UPS:

UPS
---

FreeNAS® uses `NUT <http://www.networkupstools.org/>`_ (Network UPS
Tools) to provide UPS support. If the FreeNAS® system is connected to
a UPS device, configure the UPS service then start it in
:menuselection:`Services --> Control Services`.

Figure 11.15a shows the UPS configuration screen:

**Figure 11.15a: UPS Configuration Screen**

.. image:: images/ups1.png

Table 11.15a summarizes the options in the UPS Configuration screen.

**Table 11.15a: UPS Configuration Options**

+---------------------------+----------------+-------------------------------------------------------------------------------------------------------+
| **Setting**               | **Value**      | **Description**                                                                                       |
|                           |                |                                                                                                       |
|                           |                |                                                                                                       |
+===========================+================+=======================================================================================================+
| UPS Mode                  | drop-down menu | select from *Master* or                                                                               |
|                           |                | *Slave*                                                                                               |
|                           |                |                                                                                                       |
+---------------------------+----------------+-------------------------------------------------------------------------------------------------------+
| Identifier                | string         | can contain alphanumeric, period, comma, hyphen, and underscore characters                            |
|                           |                |                                                                                                       |
+---------------------------+----------------+-------------------------------------------------------------------------------------------------------+
| Driver                    | drop-down menu | supported UPS devices are listed at                                                                   |
|                           |                | `http://www.networkupstools.org/stable-hcl.html <http://www.networkupstools.org/stable-hcl.html>`_    |
|                           |                |                                                                                                       |
+---------------------------+----------------+-------------------------------------------------------------------------------------------------------+
| Port                      | drop-down      | select the serial or USB port the UPS is plugged into (see  NOTE below)                               |
|                           | menu           |                                                                                                       |
|                           |                |                                                                                                       |
+---------------------------+----------------+-------------------------------------------------------------------------------------------------------+
| Auxiliary Parameters      | string         | additional options from                                                                               |
| (ups.conf)                |                | `ups.conf(5) <http://www.networkupstools.org/docs/man/ups.conf.html>`_                                |
|                           |                |                                                                                                       |
+---------------------------+----------------+-------------------------------------------------------------------------------------------------------+
| Auxiliary Parameters      | string         | additional options from                                                                               |
| (upsd.conf)               |                | `upsd.conf(5) <http://www.networkupstools.org/docs/man/upsd.conf.html>`_                              |
|                           |                |                                                                                                       |
+---------------------------+----------------+-------------------------------------------------------------------------------------------------------+
| Description               | string         | optional                                                                                              |
|                           |                |                                                                                                       |
+---------------------------+----------------+-------------------------------------------------------------------------------------------------------+
| Shutdown mode             | drop-down menu | choices are *UPS goes on battery* and                                                                 |
|                           |                | *UPS reaches low battery*                                                                             |
|                           |                |                                                                                                       |
+---------------------------+----------------+-------------------------------------------------------------------------------------------------------+
| Shutdown timer            | integer        | in seconds; will initiate shutdown after this many seconds after UPS enters *UPS goes on battery*,    |
|                           |                | unless power is restored                                                                              |
|                           |                |                                                                                                       |
+---------------------------+----------------+-------------------------------------------------------------------------------------------------------+
| Monitor User              | string         | default is *upsmon*                                                                                   |
|                           |                |                                                                                                       |
+---------------------------+----------------+-------------------------------------------------------------------------------------------------------+
| Monitor Password          | string         | default is known value *fixmepass* and should be changed; cannot contain a space or #                 |
|                           |                |                                                                                                       |
+---------------------------+----------------+-------------------------------------------------------------------------------------------------------+
| Extra users               | string         | defines the accounts that have administrative access; see                                             |
|                           |                | `upsd.users(5) <http://www.networkupstools.org/docs/man/upsd.users.html>`_                            |
|                           |                | for examples                                                                                          |
|                           |                |                                                                                                       |
+---------------------------+----------------+-------------------------------------------------------------------------------------------------------+
| Remote monitor            | checkbox       | if enabled, be aware that the default is to listen on all interfaces and to use the known values user |
|                           |                | *upsmon* and password                                                                                 |
|                           |                | *fixmepass*                                                                                           |
|                           |                |                                                                                                       |
+---------------------------+----------------+-------------------------------------------------------------------------------------------------------+
| Send Email Status Updates | checkbox       | if checked, activates the "To email" field                                                            |
|                           |                |                                                                                                       |
+---------------------------+----------------+-------------------------------------------------------------------------------------------------------+
| To email                  | email address  | if "Send Email" box checked, email address to receive status updates; separate multiple email         |
|                           |                | addresses with a semicolon                                                                            |
|                           |                |                                                                                                       |
+---------------------------+----------------+-------------------------------------------------------------------------------------------------------+
| Power Off UPS             | checkbox       | if checked, the UPS will also power off after shutting down the FreeNAS system                        |
|                           |                |                                                                                                       |
+---------------------------+----------------+-------------------------------------------------------------------------------------------------------+

.. note:: For USB devices, the easiest way to determine the correct
          device name is to check the box "Show console messages" in
          :menuselection:`System --> Advanced`. Plug in the USB device
          and console messages show the name of the
          */dev/ugenX.X* device, where the X's are the numbers that
          show on the console.

`upsc(8) <http://www.networkupstools.org/docs/man/upsc.html>`_
can be used to get status variables from the UPS daemon such as the
current charge and input voltage. It can be run from Shell using the
following syntax. The man page gives some other usage examples.::

 upsc ups@localhost

`upscmd(8) <http://www.networkupstools.org/docs/man/upscmd.html>`_
can be used to send commands directly to the UPS, assuming that the
hardware supports the command being sent. Only users with
administrative rights can use this command. These users are created in
the "Extra users" field.

.. index:: WebDAV
.. _WebDAV:

WebDAV
------

The WebDAV service can be configured to provide a file browser over a
web connection. Before starting this service, you must create at least
one WebDAV share using :menuselection:`Sharing --> WebDAV Shares -->
Add WebDAV Share`. Refer to :ref:`WebDAV Shares` for instructions on
how to create a share and then how to connect to it once the service
is configured and started.

The settings in the WebDAV service apply to all WebDAV shares. Figure
11.16a shows the WebDAV configuration screen. Table 11.16a summarizes
the available options.

**Figure 11.16a: WebDAV Configuration Screen**

.. image:: images/webdav2.png

**Table 11.16a: WebDAV Configuration Options**

+---------------------------+----------------+-------------------------------------------------------------------------------------------------------+
| **Setting**               | **Value**      | **Description**                                                                                       |
|                           |                |                                                                                                       |
|                           |                |                                                                                                       |
+===========================+================+=======================================================================================================+
| Protocol                  | drop-down menu | choices are *HTTP* (connection always unencrypted),                                                   |
|                           |                | *HTTPS* (connection always encrypted), or                                                             |
|                           |                | *HTTP+HTTPS* (both types of connections allowed)                                                      |
|                           |                |                                                                                                       |
+---------------------------+----------------+-------------------------------------------------------------------------------------------------------+
| HTTP Port                 | string         | only appears if the selected "Protocol" is *HTTP* or                                                  |
|                           |                | *HTTP+HTTPS* and is used to specify the port to be used for unencrypted connections; the default      |
|                           |                | of *8080* should work, if you change it,                                                              |
|                           |                | **do not** pick a port number already being used by another service                                   |
|                           |                |                                                                                                       |
+---------------------------+----------------+-------------------------------------------------------------------------------------------------------+
| HTTPS Port                | string         | only appears if the selected "Protocol" is *HTTPS* or                                                 |
|                           |                | *HTTP+HTTPS* and is used to specify the port to be used for encrypted connections; the default        |
|                           |                | of *8081* should work, if you change it,                                                              |
|                           |                | **do not** pick a port number already being used by another service                                   |
|                           |                |                                                                                                       |
+---------------------------+----------------+-------------------------------------------------------------------------------------------------------+
| Webdav SSL Certificate    | drop-down menu | only appears if the selected "Protocol" is *HTTPS* or                                                 |
|                           |                | *HTTP+HTTPS*; select the the SSL certificate to be used for encrypted connections; to create a        |
|                           |                | certificate, use `System --> Certificates`                                                            |
|                           |                |                                                                                                       |
+---------------------------+----------------+-------------------------------------------------------------------------------------------------------+
| HTTP Authentication       | drop-down menu | choices are *Basic Authentication* (unencrypted) or                                                   |
|                           |                | *Digest Authentication* (encrypted)                                                                   |
|                           |                |                                                                                                       |
+---------------------------+----------------+-------------------------------------------------------------------------------------------------------+
| Webdav Password           | string         | default is *davtest*; this should be changed as it is a known value                                   |
|                           |                |                                                                                                       |
+---------------------------+----------------+-------------------------------------------------------------------------------------------------------+
